Products

Hydrostor K3 for Mushrooms

A hydrogel especially designed for mushrooms, which improves peat water management. Thanks to its ability to collect and release water, it provides mycelium with greater humidity at the most during the production cycle. All water collected by Hydrostor is released for mycelium and peat. Thanks to Hydrostor, mushrooms are stronger and heavier, and the quality of mushrooms remains high throughout the cycle. In pre-implementaion tests, we obtained a yield increase of up to 8% in the production cycle. Hydrostor K3 is also an ideal carrier of our liquid products.

Dosage:

Depending on the depth of the substrate and technical possibilities of mixing HYDROSTOR K3 with substrate, a recommended dosage is 60g–100g per 1m2 (10,75ft2) {5.6g-9.3g per 1ft2}. The preparation should be spread evenly on the surface and mixed immediately.

Top Vital Max for Mushrooms

Is a new generation of organic agents in liquid form based on micronutrients and macroelements. Previous studies indicate that all micronutrients and macronutrients included in the preparation are necessary in the process of mycelium growth and development and play a very important role in metabolism. TOP VITAL MAX contains microelements of cobalt (Co), copper (Cu), zinc (Zn), iron (Fe), manganese (Mn), molybdenum (Mo) and macroelements – phosphorus (P) and nitrogen (N).

  • Each dosage in a fertigation process 10 ml per m2.
  • -Before first flush with the last watering.
  • -After first flush with the last watering.

Folistor for Mushrooms

biostimulator based on ingredients of natural origin. Due to the synergy eect of folic acids, ACTA, betaine glycine and algae, marine and alfalfa extracts, the mycelium is strengthened. Thanks to the action regulating the water management of cells, it helps the mycelium in the period of stress resulting from the limited availability of water at the end of the throw. Anti-stress helps in the proper functioning of the mycelium throughout the intensive cycle.In pre-implementation tests it raises the weight of a single fruiting body by up to 7%.

  • Dosage  in a fertigation process:
  • -7.5 -12.5 ml per m2 – Before first flush in the middle of watering.
  • -7.5 -12.5 ml per m2 – After first flush in the middle of watering.
  • -7.5 -12.5 ml per m2 – After second flush in the middle of watering.

Superabsorbent is to be used in agriculture.

Hydrostor Garden macromolecular polymer characterized by very high water absorption, exceeding its own weight several hundred times – 1g of Hydrostor can absorb 400-500 ml of water. It can store water and mineral nutrients in the area of  a root system and it stimulates roots to grow. With water, it creates a soft gel which is easy to mix with soil or substrate and it is not visible on the surface.It reduces water consumption up to 68% and prevents nutrients from being  leached which allows you to save up to 30% on fertilizers.

Due to its nano-porous structure, Hydrostor Garden absorbs both rainfall and dew and retains it in the layer of soil accessible to the roots of vegetables. Cycles of returning water to soil through Hydrostor Garden can be repeated thousands of times. This is accompanied by enlargement and reduction of its volume. After applying superabsorbent, it prevents water from seeping into deeper layers of soil and, also, limits evaporation from its surface. So, it prevents plants from abiotic stress caused by lack of water. Root hairs easily absorb over 90% of the water stored in Hydrostor Garden capsules.

It has a positive influence on soil microorganisms. Superabsorbent aerates soil, as well as, improves its structure and it has a positive impact on nitrogen transformations in the soil. Hydrostor being applied from the beginning strongly improves quality and size of a plant. Hydrostor Garden is safe for the environment. It has neutral pH. It is fully biodegradable.
In horticulture, Hydrostor Garden presents all advantages:

~

  •  improves supply of water and nutrients during whole vegetative cycle,

~

  • creates favorable conditions for germination and growth,

~

  • timulates root development in whole pot,

~

  • reduces stress after transplanting,

~

  • reduces fertilizers consumption.

The right dose of Hydrostor Garden depends on soil or substrate structure, plant requirements, climate conditions and irrigation system.

Universal superabsorbent used in agriculture.

HYDROSTOR MAX is a macromolecular polymer characterized by very high water absorption, exceeding its own weight several hundred times. Due to its nano-porous structure, HYDRSTOR MAX absorbs both rainfall and dew and retains it in the layer of soil accessible to  the roots of vegetables. Root hairs easily absorb  over 90% of the water stored in HYDROSTOR MAX capsules.

The agent not only prevents water from seeping into deeper layers of soil but also limits evaporation from its surface, thereby preventing nutrients from being  leached. Furthermore, it has a positive impact on  nitrogen transformation  in the soil. Cycles of returning water to soil through HYDROSTOR MAX can be repeated thousands of times. The cyclical enlargement and reduction of the absorbent’s volume aerates soil as well as improves its structure. HYDROSTOR MAX is also characterized by a high persistence in soil as the effects of its use can be observed even after 5 years. It is fully biodegradable  within 10 years.

Application:

Due to its characteristics, HYDROSTO MAX functions as water storage which adjusts the supply of water to plants during the periods of scarce rainfall. HYDROSTOR MAX also significantly affects the absorption of nutrients, which ensures optimal supplementation of plants with the applied fertilizer. HYDROSTOR MAX allows for a considerable reduction of water stress, optimal use of fertilizers and improvement of germination, which helps to increase crop yields and enhance their quality. HYDROSTOR MAX is a very efficient agent, which allows for the use of a relatively small amount of the absorbent per unit area. Therefore precise fertilizer distributors should be used. The absorbent can be applied either to the whole surface or to the surface divided into strips. In each case the distributed absorbent must be immediately mixed with soil. Microgranulate distributors mounted on seeders are highly suitable for seed sowing combined with the application of superabsorbent. In the production of seedlings HYDROSTR MAX shows numerous advantages:

  • ~
  • it improves the supply of water and nutrients to plants for the entire period of seedling production,
  • ~
    It improves the quality of seedlings and shortens the production cycle,
  • ~
    It improves the texture of the substrate and stimulates root formation,
  • ~
    It reduces the water stress after planting,
  • ~
    It allows the optimum utilization of applied fertilizers.

When calculating the dose of HYDROSTOR MAX, the characteristics of the soil or substrate, the plant requirements as well as  climatic conditions and irrigation system should be taken into consideration.

Aproximate dasage of dry product:
Substrates and potted soil 500-1000g/m3
Soil 10-30g/1m2
(mix with soil to the depth of up to 25 cm)

Superabsorbent used in agriculture for berry-growing.

HYDROSTOR MAX is a macromolecular polymer characterized by very high water absorption, exceeding its own weight several hundred times. Due to its nano-porous structure, HYDRSTOR MAX absorbs both rainfall and dew and retains it in the layer of soil accessible to  the roots of berries. Root hairs easily absorb  over 90% of the water stored in HYDROSTOR MAX capsules.

The agent not only prevents water from seeping into deeper layers of soil but also limits evaporation from its surface, thereby preventing nutrients from being  leached. Furthermore, it has a positive impact on nitrogen transformation  in the soil.
Cycles of returning water to soil through HYDROSTOR MAX can be repeated thousands of times. The cyclical enlargement and reduction of the absorbent’s volume aerates soil as well as improves its structure.
HYDROSTOR MAX is also characterized by a high persistence in soil as the effects of its use can be observed even after 5 years. It is fully biodegradable  within 10 years.

Application:

Due to its characteristics, HYDROSTO MAX  functions as  water storage which adjusts  the supply of water to plants during the periods of scarce  rainfall. HYDROSTOR MAX also significantly affects the absorption of nutrients, which ensures  optimal supplementation of plants with the applied fertilizer. HYDROSTOR MAX  allows for  a considerable reduction of water stress, optimal use of fertilizers and improvement of germination, which helps to increase crop yields and enhance their quality.

HYDROSTOR MAX is a very efficient agent, which allows for the use of a relatively small amount of the absorbent per unit area. Therefore  precise fertilizer distributors should be used. The absorbent can be applied either to the whole surface or to the surface divided into strips. In each case the distributed absorbent must be immediately mixed with soil.

It is also possible to administer soil injection of water solution of HYDROSTAR MAX. This way of application is particularly convenient in orchards and berry plantations. The depth of injection depends on tree or shrub species, and it varies from 10 to 60 cm.

When calculating the dose of HYDROSTOR MAX, the characteristics of the soil or substrate, the plant requirements as well as climatic conditions and irrigation system should be taken into consideration.

APPROXIMATE DOSAGE OF DRY PRODUCT:
APPROXIMATE DOSAGE OF DRY PRODUCT: 500-100g/m3
Soil: 10-30g/1m2
(mix with soil to the depth of up to 25 cm)

Superabsorbent is to be used in agriculture.

Hydrostor Garden macromolecular polymer characterized by very high water absorption, exceeding its own weight several hundred times – 1g of Hydrostor can absorb 400-500 ml of water. It can store water and mineral nutrients in the area of  a root system and it stimulates roots to grow. With water, it creates a soft gel which is easy to mix with soil or substrate and it is not visible on the surface.It reduces water consumption up to 68% and prevents nutrients from being  leached which allows you to save up to 30% on fertilizers.

Due to its nano-porous structure, Hydrostor Garden absorbs both rainfall and dew and retains it in the layer of soil accessible to the roots of vegetables. Cycles of returning water to soil through Hydrostor Garden can be repeated thousands of times. This is accompanied by enlargement and reduction of its volume. After applying superabsorbent, it prevents water from seeping into deeper layers of soil and, also, limits evaporation from its surface. So, it prevents plants from abiotic stress caused by lack of water. Root hairs easily absorb over 90% of the water stored in Hydrostor Garden capsules.

It has a positive influence on soil microorganisms. Superabsorbent aerates soil, as well as, improves its structure and it has a positive impact on nitrogen transformations in the soil. Hydrostor being applied from the beginning strongly improves quality and size of a plant. Hydrostor Garden is safe for the environment. It has neutral pH. It is fully biodegradable.
In horticulture, Hydrostor Garden presents all advantages:

  • ● improves supply of water and nutrients during whole vegetative cycle,
  • ● creates favorable conditions for germination and growth,
  • ● stimulates root development in whole pot,
  • ● reduces stress after transplanting,
  • ● reduces fertilizers consumption.

The right dose of Hydrostor Garden depends on soil or substrate structure, plant requirements, climate conditions and irrigation system.

Superabsorbent used in agriculture for vegetables.

HYDROSTOR MAX is a macromolecular polymer characterized by very high water absorption, exceeding its own weight several hundred times. Due to its nano-porous structure, HYDRSTOR MAX absorbs both rainfall and dew and retains it in the layer of soil accessible to  the roots of vegetables. Root hairs easily absorb  over 90% of the water stored in HYDROSTOR MAX capsules.

The agent not only prevents water from seeping into deeper layers of soil but also limits evaporation from its surface, thereby preventing nutrients from being  leached. Furthermore, it has a positive impact on  nitrogen transformation  in the soil.
Cycles of returning water to soil through HYDROSTOR MAX can be repeated thousands of times. The cyclical enlargement and reduction of the absorbent’s volume aerates soil as well as improves its structure.
HYDROSTOR MAX is also characterized by a high persistence in soil as the effects of its use can be observed even after 5 years. It is fully biodegradable  within 10 years.

Application:

Due to its characteristics, HYDROSTO MAX  functions as  water storage which adjusts  the supply of water to plants during the periods of scarce  rainfall. HYDROSTOR MAX also significantly affects the absorption of nutrients, which ensures  optimal supplementation of plants with the applied fertilizer.

HYDROSTOR MAX  allows for  a considerable reduction of water stress, optimal use of fertilizers and improvement of germination, which helps to increase crop yields and enhance their quality. HYDROSTOR MAX is a very efficient agent, which allows for the use of a relatively small amount of the absorbent per unit area. Therefore  precise fertilizer distributors should be used. The absorbent can be applied either to the whole surface or to the surface divided into strips. In each case the distributed absorbent must be immediately mixed with soil. Microgranulate distributors mounted on seeders are highly suitable for seed sowing combined with the application of superabsorbent.

In the production of seedlings  HYDROSTOR MAX shows numerous advantages:

  • • It  improves the supply of water and nutrients to plants for the entire period of seedling production
  • • It improves the quality of seedlings and shortens the production cycle
  • • It improves  the texture of the substrate and stimulates root formation
  • • It reduces the water stress after planting
  • • It allows the optimum utilization of applied fertilizers

When calculating the dose of HYDROSTOR MAX, the characteristics of the soil or substrate, the plant requirements as well as  climatic conditions and irrigation system should be taken into consideration.

Aproximate dasage of dry product:
Substrates and potted soil 500-1000g/m3
Soil 10-30g/1m2
(mix with soil to the depth of up to 25 cm)

Hydrostor K3 for Mushrooms

A hydrogel especially designed for mushrooms, which improves peat water management. Thanks to its ability to collect and release water, it provides mycelium with greater humidity at the most during the production cycle. All water collected by Hydrostor is released for mycelium and peat. Thanks to Hydrostor, mushrooms are stronger and heavier, and the quality of mushrooms remains high throughout the cycle. In pre-implementaion tests, we obtained a yield increase of up to 8% in the production cycle. Hydrostor K3 is also an ideal carrier of our liquid products.

Dosage:

Depending on the depth of the substrate and technical possibilities of mixing HYDROSTOR K3 with substrate, a recommended dosage is 60g–100g per 1m2 (10,75ft2) {5.6g-9.3g per 1ft2}. The preparation should be spread evenly on the surface and mixed immediately.

Top Vital Max for Mushrooms

Is a new generation of organic agents in liquid form based on micronutrients and macroelements. Previous studies indicate that all micronutrients and macronutrients included in the preparation are necessary in the process of mycelium growth and development and play a very important role in metabolism. TOP VITAL MAX contains microelements of cobalt (Co), copper (Cu), zinc (Zn), iron (Fe), manganese (Mn), molybdenum (Mo) and macroelements – phosphorus (P) and nitrogen (N).

  • Each dosage in a fertigation process 10 ml per m2.
  • -Before first flush with the last watering.
  • -After first flush with the last watering.

Folistor for Mushrooms

biostimulator based on ingredients of natural origin. Due to the synergy efect of folic acids, ACTA, betaine glycine and algae, marine and alfalfa extracts, the mycelium is strengthened. Thanks to the action regulating the water management of cells, it helps the mycelium in the period of stress resulting from the limited availability of water at the end of the throw. Anti-stress helps in the proper functioning of the mycelium throughout the intensive cycle.In pre-implementation tests it raises the weight of a single fruiting body by up to 7%.

  • Dosage in a fertigation process:
  • -7.5 -12.5 ml per m2 -Before first flush in the middle of watering
  • -7.5 -12.5 ml per m2 -After first flush in the middle of watering
  • -7.5 -12.5 ml per m2 -After second flush in the middle of watering